Essential Requirements for Roofing Supplies

by tommaync

Essential Requirements for Roofing Supplies

Roofing supplies include a wide range of materials and items used for the construction and maintenance of a roof.  This means not only shingles but molding, lumber, pipes and vents, roofing cements, ladders and all the handy tools , even roofing nails. 

Starting at the top, let’s consider the roofing material.  This is considered the roof proper and includes wood shingles, ceramic tiles, asbestos shingles, metal roofing sheets and tiles, rubber roofing sheets and shingles, and a lot of other types of materials.  The roofing material should be chosen based on location, so that the roof will withstand the local elements and issues that impact a roof.

The frame or support structure of a roof is lumber.  This usually consists of a triangular truss and a lattice of beams.  The roof itself is then laid over the frame.  Lumber is used for other elements including the cornice, part of the frame that hangs over the wall, the fascia, or underside of the cornice, the eave, which allows water to drip away from the roof, and the soffit, or underside of the eave.

Pipes and vents protrude from the roof.  They help the house breathe, and are also the escape routes for smoke from a fireplace or cooking hood, as well as for hot air from the attic.  The bottoms of pipes and vents are commonly sealed with a boot, or metal strip, including a lead based or plastic sealant.  These pipes and vents have one way shields sealed with rubber so that the air or smoke can escape, but water doesn’t drip into the pipe or vent.

Now onto the roofing tools which include the ladder to climb up to the roof, as well as other items necessary for both installation and removal, as well as for regular maintenance.  These include simple items such as a broom and bucket to hold waste shingles, a slater’s hammer complete with a hammer as well as an ax and blade, a slate cutter to cut through shingles, seaming pliers to grab shingles, and a hip runner to install the ridge cap, the portion of the roof that caps the seams.

Roofing nails must be long enough to go through the shingles and go further to about 3/8 inch below the bottom of the shingle.  Anything that interferes with the nails biting into the wood could cause the nail to spring out of the shingle, and eventually the loss of shingles.  This includes shingles with ridges, some under shingle materials, and of course nails that aren’t long enough for the roofing material.  A good roofer can drive a roofing nail with one solid hit.  A homeowner doing it themselves will find that they can drive the nails with one hit after only a few minutes.

Roofing supplies aren’t as simple as they first seem.  But with a little planning, you’ll have everything needed for a quality roof.

Related Roofing Supplies Articles